Загальні стандарти по методах контролю

Радіаційний контроль

1

EN ISO 5579:2013 

Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules (ISO 5579:2013)

2

EN ISO 11699-1:2011

Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography (ISO 11699-1:2008)

3

EN ISO 11699-2:2018

Non-destructive testing - Industrial radiographic films - Part 2: Control of film processing by means of reference values (ISO 11699-2:2018)

4

EN ISO 14096-1:2020

Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control (ISO 14096-1:2005)

5

EN ISO 14096-2:2020

Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2: Minimum requirements (ISO 14096-2:2005)

6

EN ISO 15708-1:2019 

Non-destructive testing - Radiation methods for computed tomography - Part 1: Terminology (ISO 15708-1:2017)

7

EN ISO 15708-2:2019 

Non-destructive testing - Radiation methods for computed tomography - Part 2: Principles, equipment and samples (ISO 15708-2:2017)

8

EN ISO 15708-3:2019 

Non-destructive testing - Radiation methods for computed tomography - Part 3: Operation and interpretation (ISO 15708-3:2017)

9

EN ISO 15708-4:2019 

Non-destructive testing - Radiation methods for computed tomography - Part 4: Qualification (ISO 15708-4:2017)

10

EN ISO 16371-2:2017 

Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays (ISO 16371-2:2017, Corrected version 2018-05)

11

EN ISO 16526-1:2020 

Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1: Voltage divider method (ISO 16526-1:2011)

12

EN ISO 16526-2:2020 

Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method (ISO 16526-2:2011)

13

EN ISO 16526-3:2020 

Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method (ISO 16526-3:2011)

14

EN ISO 19232-1:2013 

Non-destructive testing - Image quality of radiographs - Part 1: Determination of the image quality value using wire-type image quality indicators (ISO 19232-1:2013)

15

EN ISO 19232-2:2013 

Non-destructive testing - Image quality of radiographs - Part 2: Determination of the image quality value using step/hole-type image quality indicators (ISO 19232-2:2013)

16

EN ISO 19232-3:2013 

Non-destructive testing - Image quality of radiographs - Part 3: Image quality classes (ISO 19232-3:2013)

17

EN ISO 19232-4:2013 

Non-destructive testing - Image quality of radiographs - Part 4: Experimental evaluation of image quality values and image quality tables (ISO 19232-4:2013)

18

EN ISO 19232-5:2018 

Non-destructive testing - Image quality of radiographs - Part 5: Determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators (ISO 19232-5:2018)

19

EN ISO 20769-1:2018 

Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X - and gamma rays - Part 1: Tangential radiographic inspection (ISO 20769-1:2018)

20

EN ISO 20769-2:2018 

Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2: Double wall radiographic inspection (ISO 20769-2:2018)

21

EN 12543-1:1999

Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method

22

EN 12543-2:2008 

Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method

23

EN 12543-3:1999 

Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 3: Slit camera radiographic method

24

EN 12543-4:1999 

Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 4: Edge method

25

EN 12543-5:1999 

Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 5: Measurement of the effective focal spot size of mini and micro focus X-ray tubes

26

EN 12679:2018 

Non-destructive testing - Radiographic testing - Determination of the size of industrial radiographic gamma sources

27

EN 13068-1:1999 

Non-destructive testing - Radioscopic testing - Part 1: Quantitative measurement of imaging properties

28

EN 13068-2:1999 

Non-destructive testing - Radioscopic testing - Part 2: Check of long term stability of imaging devices

29

EN 13068-3:2001 

Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays

30

EN 13925-1:2003 

Non-destructive testing - X-ray diffraction from polycrystalline and amorphous material - Part 1: General principles

31

EN 13925-2:2003 

Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Part 2: Procedures

32

EN 13925-3:2005 

Non-destructive testing - X ray diffraction from polycrystalline and amorphous materials - Part 3: Instruments

33

EN 14784-1:2005 

Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 1: Classification of systems

34

EN 15305:2008 

Non-destructive testing - Test method for residual stress analysis by X-ray diffraction

35

EN 25580:1992 

Non-destructive testing - Industrial radiographic illuminators - Minimum requirements (ISO 5580:1985)

....

................................

.............................................................................................................................................

.............................................................................................................................................

Повна версія структурованого за методами контролю і видами продукції переліку європейських стандартів з НК (всього 176 стандартів) доступна для членів УТ НКТД за запитом на e-mail: usndt@ukr.net